Car retailers and mechanics continuously search for the most efficient method of keeping a vehicle looking like new. One successful method they have found is paintless dent repair. Paintless dent repair is a method that allows technicians to repair minor dents that have not disturbed the paint job. Most popularly, these damages include those from a hail storm, door dings, and minor creases.
The process can also remove minor bumper indentations, but the key is that no real damage has occurred to the paint. Once damage has occurred to the vehicle, the owner can investigate the problem to decide whether or not this type of dent repair would be a successful option for their vehicle. First, the owner should inspect the shallowness of the dent. The deeper the dent is, the more damage that has occurred to the vehicle. Then, if the dent is fairly shallow, it is likely that the paint is unharmed. Obvious examples of the paint being damaged from the dent would likely mean that this type of dent repair would not successfully repair the car.
On the other hand, some scratches in the paint job are misleading and can be buffed away with a color-sander and polish. The best way to determine if a dent can be fixed with paintless dent removal is by taking it to a licensed technician. Paintless dent removal is becoming an increasingly popular method among car owners, as it is a quick and efficient way to repair minor damage to a vehicle. Car companies are using advanced technology to create better and stronger paints. These paints allow the vehicle to be hit, damaging the metal exterior, but preserving the paint itself.
In addition, car companies are using stronger metal to build vehicles. While these metals can still be dented, they are stronger and more able to withstand the ding, leaving a shallow mark. These stronger paints and metals also contribute to less stretching when being the car is hit. If the paint or metal is stretch as the car is dinged, paintless dent repair will be less successful.When choosing a technician to fix a vehicle via paintless dent repair, it is important to chose one with years of experience and good reviews. Paintless dent repair is a delicate process and, if the technician is untrained, can easily cause further damage. When popping out a dent, the technician will use an LED light or other reflective board to inspect the surface of the vehicle. It is critical that the technician locate the exact point at which the vehicle was hit, as this is the point that needs a reversed force to pop out the indention.
The most common practice when performing paintless dent repairs is using a rod or other thin tool to pop out the dent from inside of the panel. The technician will find the central point of the dent and use the rod to apply pressure. The technician will gently continue to increase the applied pressure until the ding pops out back into place. Otherwise, technicians can use glue and tabs which stick to the dented metal and allow the technicians to pull the dent out. While this process is very similar to that of using rods to remove the dent, it applies pressure on the opposite side of the panel than that of the rod. The technician will again need to locate the deepest point of the dent and apply gentle pressure to pull the dent out.
When performed properly, these dent repairs do not bring any further damage to the vehicle or the paint. Technicians speculate that this procedure results in a ninety-nine percent success rate. Therefore, if the paint is scratched or cracks while performing these dent repairs, it is likely that the technician is inexperienced with this process. While paintless dent repair is most often used for minor dents, the process is becoming more popular among larger dents and vehicle damage. If a vehicle has experienced a major hit, not only will the metal be dented, but the paint will be damaged. In these cases, technicians can remove the damaged panel of the vehicle and pop the metal back into its original shape via paintless dent repair. Once the dent is removed, the technicians can decide to what extent the metal was stretched in the hit. The technician will then used a heating method to shrink the expanded metal and mold the panel as desired. Then, once the dent and metal have been saved, the paint will be assessed.
Scratches can be buffed and polished into perfection, but with large dents it is likely that more damage would have occurred to the vehicle. In such cases the technician and the owner would decide whether or not painting the panel is an option. Painting a panel would depend on color availability and how much the owner is willing to spend. Paintless dent repair is an effective way for car owners to keep their investment looking as good as it did the day they purchased it.
If you are looking for a paintless dent repair specialist in Denver, CO then I suggest you contact Denver Dent at 720-629-8904.